Table 'FACP' at 0xcfefcf10 Table 'APIC' at 0xcfefce10 APIC: Found table at 0xcfefce10 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 130 ACPI ID 3: disabled MADT: Found CPU APIC ID 131 ACPI ID 4: disabled Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.2-RELEASE #0: Thu Feb 17 02:41:51 UTC 2011 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff811a1000. Preloaded mfs_root "/boot/mfsroot" at 0xffffffff811a11e8. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2805714730 Hz CPU: Intel(R) Pentium(R) D CPU 2.80GHz (2805.71-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0xf62 Family = f Model = 6 Stepping = 2 Features=0xbfebfbff Features2=0xe43d AMD Features=0x20100800 AMD Features2=0x1 TSC: P-state invariant real memory = 6442450944 (6144 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000094fff, 606208 bytes (148 pages) 0x00000000011d2000 - 0x00000000c2215fff, 3238281216 bytes (790596 pages) 0x00000000cedec000 - 0x00000000cfea1fff, 17522688 bytes (4278 pages) 0x00000000cfee9000 - 0x00000000cfeecfff, 16384 bytes (4 pages) 0x00000000cfeff000 - 0x00000000cfefffff, 4096 bytes (1 pages) 0x0000000100000000 - 0x00000001affeffff, 2952724480 bytes (720880 pages) avail memory = 6167900160 (5882 MB) ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 x86bios: IVT 0x000000-0x0004ff at 0xffffff0000000000 x86bios: SSEG 0x010000-0x01ffff at 0xffffff800001c000 x86bios: EBDA 0x099000-0x09ffff at 0xffffff0000099000 x86bios: ROM 0x0a0000-0x0effff at 0xffffff00000a0000 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xfe020 00014 (v00 INTEL ) ACPI: RSDT 0xcfefde48 00040 (v01 INTEL D975XBX 000005CF MSFT 01000013) ACPI: FACP 0xcfefcf10 00074 (v01 INTEL D975XBX 000005CF MSFT 01000013) ACPI: DSDT 0xcfef8010 03F75 (v01 INTEL D975XBX 000005CF MSFT 01000013) ACPI: FACS 0xcfedfc40 00040 ACPI: APIC 0xcfefce10 00078 (v01 INTEL D975XBX 000005CF MSFT 01000013) ACPI: WDDT 0xcfef7f90 00040 (v01 INTEL D975XBX 000005CF MSFT 01000013) ACPI: MCFG 0xcfef7f10 0003C (v01 INTEL D975XBX 000005CF MSFT 01000013) ACPI: ASF! 0xcfefcd10 000A6 (v32 INTEL D975XBX 000005CF MSFT 01000013) ACPI: HPET 0xcfef7e90 00038 (v01 INTEL D975XBX 000005CF MSFT 01000013) ACPI: SSDT 0xcfef7e10 0002F (v01 INTEL SetupVar 000005CF MSFT 01000013) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 2 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 wlan: <802.11 Link Layer> random: nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: io: null: hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xf0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: on acpi0 cpu0: switching to generic Cx mode cpu1: on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 7 9 10 11 12 Validation 0 10 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 7 9 10 11 12 Validation 0 10 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 3 4 5 7 9 10 11 12 Validation 0 9 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 Validation 0 255 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 Validation 0 255 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 3 4 5 7 9 10 11 12 Validation 0 9 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 Validation 0 11 N 0 3 4 5 7 9 10 11 12 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x277c, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x277d, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x27d8, revid=0x01 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xe2300000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x27d0, revid=0x01 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x27e0, revid=0x01 domain=0, bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x27e2, revid=0x01 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x27c8, revid=0x01 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x4080, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4080 found-> vendor=0x8086, dev=0x27c9, revid=0x01 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 map[20]: type I/O Port, range 32, base 0x4060, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4060 found-> vendor=0x8086, dev=0x27ca, revid=0x01 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 map[20]: type I/O Port, range 32, base 0x4040, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4040 found-> vendor=0x8086, dev=0x27cb, revid=0x01 domain=0, bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type I/O Port, range 32, base 0x4020, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x4020 found-> vendor=0x8086, dev=0x27cc, revid=0x01 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xe2304400, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe2304400 found-> vendor=0x8086, dev=0x244e, revid=0xe1 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27b0, revid=0x01 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27df, revid=0x01 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0x40b0, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 18 found-> vendor=0x8086, dev=0x27c3, revid=0x01 domain=0, bus=0, slot=31, func=2 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0x40c8, size 3, enabled map[14]: type I/O Port, range 32, base 0x40e4, size 2, enabled map[18]: type I/O Port, range 32, base 0x40c0, size 3, enabled map[1c]: type I/O Port, range 32, base 0x40e0, size 2, enabled map[20]: type I/O Port, range 32, base 0x40a0, size 4, enabled map[24]: type Memory, range 32, base 0xe2304000, size 10, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x27da, revid=0x01 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 map[20]: type I/O Port, range 32, base 0x4000, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 pcib1: at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xe0000000-0xe1ffffff pcib1: prefetched decode 0xd0000000-0xdfffffff pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.PEG1 - AE_NOT_FOUND pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x0392, revid=0xa1 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xe1000000, size 24, enabled pcib1: requested memory range 0xe1000000-0xe1ffffff: good map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled pcib1: requested memory range 0xd0000000-0xdfffffff: good map[1c]: type Memory, range 64, base 0xe0000000, size 24, enabled pcib1: requested memory range 0xe0000000-0xe0ffffff: good map[24]: type I/O Port, range 32, base 0x3000, size 7, enabled pcib1: requested I/O range 0x3000-0x307f: in range pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 pcib1: slot 0 INTA is routed to irq 16 vgapci0: port 0x3000-0x307f mem 0xe1000000-0xe1ffffff,0xd0000000-0xdfffffff,0xe0000000-0xe0ffffff irq 16 at device 0.0 on pci1 pci0: at device 27.0 (no driver attached) pcib2: at device 28.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xe2200000-0xe22fffff pcib2: no prefetched decode pci2: on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x168c, dev=0x002b, revid=0x01 domain=0, bus=2, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D3 current D0 MSI supports 1 message map[10]: type Memory, range 64, base 0xe2200000, size 16, enabled pcib2: requested memory range 0xe2200000-0xe220ffff: good pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 16 ath0: mem 0xe2200000-0xe220ffff irq 16 at device 0.0 on pci2 ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe2200000 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49 ath0: [MPSAFE] ath0: [ITHREAD] ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11ng MCS: 15Mbps 30Mbps 45Mbps 60Mbps 90Mbps 120Mbps 135Mbps 150Mbps 30Mbps 60Mbps 90Mbps 120Mbps 180Mbps 240Mbps 270Mbps 300Mbps ath0: AR9285 mac 192.2 RF5133 phy 14.0 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons ath0: using multicast key search pcib3: at device 28.4 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xe2400000-0xe24fffff pcib3: no prefetched decode pci3: on pcib3 pci3: domain=0, physical bus=3 pcib4: at device 28.5 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0x2000-0x2fff pcib4: memory decode 0xe2100000-0xe21fffff pcib4: no prefetched decode pci4: on pcib4 pci4: domain=0, physical bus=4 found-> vendor=0x8086, dev=0x109a, revid=0x00 domain=0, bus=4, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xe2100000, size 17, enabled pcib4: requested memory range 0xe2100000-0xe211ffff: good map[18]: type I/O Port, range 32, base 0x2000, size 5, enabled pcib4: requested I/O range 0x2000-0x201f: in range pcib4: matched entry for 4.0.INTA pcib4: slot 0 INTA hardwired to IRQ 17 em0: port 0x2000-0x201f mem 0xe2100000-0xe211ffff irq 17 at device 0.0 on pci4 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xe2100000 em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 50 em0: using IRQ 256 for MSI em0: Using an MSI interrupt em0: [FILTER] em0: bpf attached em0: Ethernet address: 00:16:76:6b:04:d7 uhci0: port 0x4080-0x409f irq 23 at device 29.0 on pci0 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 51 uhci0: [MPSAFE] uhci0: [ITHREAD] uhci0: LegSup = 0x2f00 usbus0: on uhci0 uhci1: port 0x4060-0x407f irq 19 at device 29.1 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 52 uhci1: [MPSAFE] uhci1: [ITHREAD] uhci1: LegSup = 0x2f00 usbus1: on uhci1 uhci2: port 0x4040-0x405f irq 18 at device 29.2 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53 uhci2: [MPSAFE] uhci2: [ITHREAD] uhci2: LegSup = 0x2f00 usbus2: on uhci2 uhci3: port 0x4020-0x403f irq 16 at device 29.3 on pci0 uhci3: [MPSAFE] uhci3: [ITHREAD] uhci3: LegSup = 0x2f00 usbus3: on uhci3 ehci0: mem 0xe2304400-0xe23047ff irq 23 at device 29.7 on pci0 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: on ehci0 pcib5: at device 30.0 on pci0 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0x1000-0x1fff pcib5: memory decode 0xe2000000-0xe20fffff pcib5: no prefetched decode pcib5: Subtractively decoded bridge. pci5: on pcib5 pci5: domain=0, physical bus=5 found-> vendor=0x104c, dev=0x8024, revid=0x00 domain=0, bus=5, slot=4, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xe2004000, size 11, enabled pcib5: requested memory range 0xe2004000-0xe20047ff: good map[14]: type Memory, range 32, base 0xe2000000, size 14, enabled pcib5: requested memory range 0xe2000000-0xe2003fff: good pcib5: matched entry for 5.4.INTA pcib5: slot 4 INTA hardwired to IRQ 18 found-> vendor=0x1095, dev=0x3114, revid=0x02 domain=0, bus=5, slot=5, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0x1018, size 3, enabled pcib5: requested I/O range 0x1018-0x101f: in range map[14]: type I/O Port, range 32, base 0x1024, size 2, enabled pcib5: requested I/O range 0x1024-0x1027: in range map[18]: type I/O Port, range 32, base 0x1010, size 3, enabled pcib5: requested I/O range 0x1010-0x1017: in range map[1c]: type I/O Port, range 32, base 0x1020, size 2, enabled pcib5: requested I/O range 0x1020-0x1023: in range map[20]: type I/O Port, range 32, base 0x1000, size 4, enabled pcib5: requested I/O range 0x1000-0x100f: in range map[24]: type Memory, range 32, base 0xe2004800, size 10, enabled pcib5: requested memory range 0xe2004800-0xe2004bff: good pcib5: matched entry for 5.5.INTA pcib5: slot 5 INTA hardwired to IRQ 17 fwohci0: mem 0xe2004000-0xe20047ff,0xe2000000-0xe2003fff irq 18 at device 4.0 on pci5 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xe2004000 fwohci0: [MPSAFE] fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:90:27:00:01:a6:c5:f9 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0xcedf4000 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:90:27:a6:c5:f9 fwe0: bpf attached fwe0: Ethernet address: 02:90:27:a6:c5:f9 fwip0: on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:90:27:00:01:a6:c5:f9 @ 0xfffe00000000, S400, maxrec 2048 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode atapci0: port 0x1018-0x101f,0x1024-0x1027,0x1010-0x1017,0x1020-0x1023,0x1000-0x100f mem 0xe2004800-0xe2004bff irq 17 at device 5.0 on pci5 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1000 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 54 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xe2004800 ata2: on atapci0 ata2: SATA connect timeout status=00000000 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci0 ata3: SATA connect timeout status=00000000 ata3: [MPSAFE] ata3: [ITHREAD] ata4: on atapci0 ata4: SATA connect timeout status=00000000 ata4: [MPSAFE] ata4: [ITHREAD] ata5: on atapci0 ata5: SATA connect timeout status=00000000 ata5: [MPSAFE] ata5: [ITHREAD] isab0: at device 31.0 on pci0 isa0: on isab0 atapci1: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40b0-0x40bf irq 18 at device 31.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x40b0 ata0: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=00 ostat1=7f ata0: stat0=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55 ata0: [MPSAFE] ata0: [ITHREAD] atapci2: port 0x40c8-0x40cf,0x40e4-0x40e7,0x40c0-0x40c7,0x40e0-0x40e3,0x40a0-0x40af mem 0xe2304000-0xe23043ff irq 19 at device 31.2 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0x40a0 atapci2: [MPSAFE] atapci2: [ITHREAD] pci0: child atapci2 requested type 4 for rid 0x24, but the BAR says it is an memio ata6: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x40c8 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0x40e4 ata6: reset tp1 mask=03 ostat0=80 ostat1=80 ata6: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata6: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata6: reset tp2 stat0=50 stat1=00 devices=0x20001 ata6: [MPSAFE] ata6: [ITHREAD] ata7: on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x40c0 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0x40e0 ata7: reset tp1 mask=03 ostat0=50 ostat1=80 ata7: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata7: stat1=0x50 err=0x01 lsb=0x00 msb=0x00 ata7: reset tp2 stat0=50 stat1=50 devices=0x3 ata7: [MPSAFE] ata7: [ITHREAD] pci0: at device 31.3 (no driver attached) atrtc0: port 0x70-0x71,0x74-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) fdc0: port 0x3f0-0x3f5,0x3f0 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 56 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: using extended I/O port range ppc0: SPP ECP ECP+EPP ppc0: port 0x378-0x37f,0x778-0x77f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 57 ppc0: [MPSAFE] ppc0: [ITHREAD] ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached plip0: [MPSAFE] plip0: [ITHREAD] lpt0: on ppbus0 lpt0: [MPSAFE] lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: on ppbus0 psmcpnp0: irq 12 on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0067 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 59 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 60 uart0: [FILTER] uart0: fast interrupt acpi0: wakeup code va 0xffffff81b3a24000 pa 0x4000 ex_isa_identify() isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xcf000-0xd37ff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uart1: failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices p4tcc0: on cpu0 p4tcc1: on cpu1 Device configuration finished. procfs registered RTC BIOS diagnostic error 80 lapic: Divisor 2, Frequency 100204066 Hz Timecounter "TSC" frequency 2805714730 Hz quality -100 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. ata0: Identifying devices: 00000000firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 ata0: New devices: 00000000 ata2: Identifying devices: 00000000 ata2: New devices: 00000000 ata3: Identifying devices: 00000000 ata3: New devices: 00000000 ata4: Identifying devices: 00000000 ata4: New devices: 00000000 ata5: Identifying devices: 00000000 ata5: New devices: 00000000 ata6: Identifying devices: 00020001 ata6: New devices: 00020001 md0: Preloaded image 4194304 bytes at 0xffffffff80d9fe20 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ata6-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad12: setting UDMA100 ad12: 476940MB at ata6-master UDMA100 SATA ad12: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 ********* ATA Intel MatrixRAID Metadata ********* intel_id version <1.1.00> checksum 0xef0d4c64 config_size 0x000001e0 config_id 0x3b6bf030 generation 0x002e14f0 total_disks 2 total_volumes 1 DISK# serial disk_sectors disk_id flags 0 976773168 0x00010100 0x0000013a 1 976773168 0x00000000 0x0000013a name DUAL total_sectors 976773160 state 12 reserved 0 offset 0 disk_sectors 976773160 stripe_count 1907760 stripe_sectors 256 status 0 type RAID1 total_disks 2 magic[0] 0x02 magic[1] 0xff magic[2] 0x01 disk 0 at disk_idx 0x00000000 disk 1 at disk_idx 0x00000001 ================================================= acd0: setting UDMA100 acd0: DVDR drive at ata6 as slave acd0: read 8268KB/s (8268KB/s) write 8268KB/s (8268KB/s), 2048KB buffer, UDMA100 SATA acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata7: Identifying devices: 00000003 ata7: New devices: 00000003 ata7-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ata7-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad14: setting UDMA100 ad14: 1907729MB at ata7-master UDMA100 SATA ad14: 3907029168 sectors [3876021C/16H/63S] 16 sectors/interrupt 1 depth queue ad14: Intel check1 failed ad14: Adaptec check1 failed ad14: LSI (v3) check1 failed ad14: LSI (v2) check1 failed ad14: FreeBSD check1 failed ad15: setting UDMA100 ad15: 476940MB at ata7-slave UDMA100 SATA ad15: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue ********* ATA Intel MatrixRAID Metadata ********* intel_id version <1.1.00> checksum 0xef0d4c64 config_size 0x000001e0 config_id 0x3b6bf030 generation 0x002e14f0 total_disks 2 total_volumes 1 DISK# serial disk_sectors disk_id flags 0 976773168 0x00010100 0x0000013a 1 976773168 0x00000000 0x0000013a name DUAL total_sectors 976773160 state 12 reserved 0 offset 0 disk_sectors 976773160 stripe_count 1907760 stripe_sectors 256 status 0 type RAID1 total_disks 2 magic[0] 0x02 magic[1] 0xff magic[2] 0x01 disk 0 at disk_idx 0x00000000 disk 1 at disk_idx 0x00000001 ================================================= ATA PseudoRAID loaded ********** ATA PseudoRAID ar0 Metadata ********** ================================================= format Intel MatrixRAID type RAID1 flags 0x01 1 magic_0 0x000000003b6bf030 magic_1 0x0000000000000000 generation 3020016 total_sectors 976773160 offset_sectors 0 heads 255 sectors 63 cylinders 60801 width 1 interleave 256 total_disks 2 disk 0: flags = 0x0b b ad15: sectors 976773168 disk 1: flags = 0x0b b ad12: sectors 976773168 ================================================= ar0: 476940MB status: READY ar0: 976773160 sectors [60801C/255H/63S] subdisks defined as: ar0: disk0 READY (master) using ad15 at ata7-slave ar0: disk1 READY (mirror) using ad12 at ata6-master SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 48 ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 1 vector 49 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 1 vector 50 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 51 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 52 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 1 vector 53 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 8 ports with 8 removable, self powered ugen4.2: at usbus4 uhub5: on usbus4 uhub5: 4 ports with 4 removable, self powered ugen0.2: at usbus0 GEOM: new disk ad12 GEOM: new disk ad14 GEOM: new disk ad15 GEOM: new disk ar0 GEOM: ad12s4: geometry does not match label (255h,63s != 16h,63s). GEOM: ad12s4: media size does not match label. GEOM: ad15s4: geometry does not match label (255h,63s != 16h,63s). GEOM: ad15s4: media size does not match label. GEOM: ar0s4: media size does not match label. ugen4.3: at usbus4 umass0: on usbus4 umass0: SCSI over Bulk-Only; quirks = 0x0000 Root mount waiting for: usbus4 umass0:0:0:-1: Attached to scbus0 Root mount waiting for: usbus4 Trying to mount root from ufs:/dev/md0